It adopts Isuzu 700p chassis, Isuzu 120 horsepower engine, 6-speed gearbox, wheelbase 3815 (mm), 2.5 ton front axle, 5 ton rear axle, 7.00-16 tires, double-sided linkage operation, direction assist, air brake. Contact information Ms xi chen Email: chinatrucks @ foxmail.com Whatsapp： 0086-18727992799 Top configuration of Isuzu 700p flatbed wrecker truck: Crane: 2 tons of cranes, 3 tons of cranes, 4 tons of cranes, 5 tons of cranes, etc. can be selected. Isuzu 700p flatbed wrecker. The flatbed is 6.2 meters long, 2.38 meters wide, 5mm thick, and has a load-bearing capacity of 4 tons. It is strong in performance and endurance. Equipped with a pair of auxiliary wheels, a hydraulic winch of 5 tons, a 25-meter steel wire rope, double-sided linkage operation, a pair of forks, a pair of square sleeves, a set of vehicle tools, 4 straps, two work lights, and yellow electronics Police lights. The wrecker of our company adopts foreign advanced and skilled product technology and production technology, all imported seals, new anti-skid plates, reinforced beams are fixed, which enhances the carrying capacity, and the platform loading surface is stamped with molds, which has strong endurance and no deformation. Folding mechanism: The minimum included angle between the board and the ground is 8~10° (depending on the model), which is suitable for the operation requirements of most domestic and foreign trolley chassis heights. When the front wheels of some cars with lower chassis reach the plate, the front suspension may collide with the plate surface. The folding plate can easily cope with this problem that is difficult to solve with the traditional plate. Lifting mechanism: The damaged vehicle is lifted from the front or the rear by the extension, lifting, and folding of the supporting arm, and then the whole vehicle is towed away from the scene. The brackets of the wrecker truck have a variety of structural forms. Generally, they can lift the axles, wheels, leaf springs, frame, etc. of the accident vehicle, which is convenient for assembly and disassembly. Hydraulic system: The flatbed wrecker is fully hydraulically driven to work, which integrates multiple functions such as lifting, back loading, towing, and pulling. The hydraulic tubing adopts high-pressure galvanized steel pipe, which has high pressure resistance, good heat dissipation performance, beautiful appearance and durability, and its service life can be synchronized with the upper installation; the hydraulic tubing joint adopts an imported ferrule rigid connector (Germany), which greatly reduces oil leakage and oil leakage at the interface. Phenomenon, the service life can also be synchronized with the bodywork. Contact information Ms xi chen Email: chinatrucks @ foxmail.com Whatsapp： 0086-18727992799